Avaya VSP 7200 Series Installing Manual page 55

Installing the switch in an equipment rack
b. Pull the blue latches on the chassis rails towards the front and slide the switch into the
frame.
Note:
After you install the switch in a rack, slide it out until the lock (shown above) engages.
To slide the switch back into the rack, push the blue release latches on the chassis rails
towards the back and slide the switch into the frame.
8. Connect power and network connections to the switch.
November 2016 Installing the Avaya VSP 7200 Series 55
Comments on this document? infodev@avaya.com