Setting Program Defaults - DURKOPP ADLER D867 M-Type Delta Service Instructions Manual

19.5 Setting Program defaults

Customer-specific settings can be made here, which are automatically
used as preset values for the first seam section during the creation of a
new program. Select the values so that they can be retained for as many
programs as possible.
Menu items in the Program defaults
Icon
156
• Function module output 3
• Function module output 4
• Function module output 5
• Function module output 6
• Function module output 7
• Function module output 8
nd
• 2 edge Guide Height
• Clean SSD
Menu item
Stitch length
Default value
Sewing foot pressure
Default value
Needle thread tension
Default value
Sewing foot stroke
Bartack at seam begin
Bartack at seam end
Thread trimmer
Value range
• Value range
00.0 - 12.0
(depending on sewing
equipment and
subclass)
• Value range
01 - 20
• Value range
01 - 99 [%]
• Value range
0.5 - 9.0 [mm]
• Value range
On/Off
• Value range
On/Off
• Value range
On/Off
Service Instructions M-TYPE DELTA - 00.0 - 12/2019
Programming