Installing An Ioc Or Spc - Juniper SRX5600 Installation And Initial Configuration Manual

Installing an IOC or SPC

• Orient the IOC or SPC so that the faceplate faces you, the text on the card is right-side
up, and the EMI strip is on the right-hand side.
• Lift the IOC or SPC into place and carefully align first the bottom and then the top of Lif h IOC
the card with the guides inside the card cage.
• Slide the IOC or SPC all the way into the card cage until you feel resistance.
• Grasp both ejector handles and rotate them simultaneously clockwise until the IOC or
SPC is fully seated.
© 2010 Juniper Networks, Inc. All rights reserved.
SPC i l d f ll li fi h b
CONFIDENTIAL
d h h f
www.juniper.net | 116
FSSSRX5800