Installing a Routing Engine
• Attach an ESD grounding strap to your bare wrist, and connect the strap to one of the ESD
points on the chassis.
• Remove the RE from its electrostatic bag or antistatic mat.
R
h RE f
• Ensure the ejector handles are not in the locked position. If they are locked, flip them outward
to unlock them.
• Place one hand underneath the Routing Engine to support it. With the other hand, grasp one
of the ejector handles on the faceplate.
• Carefully align the sides of the Routing Engine with the guides inside the opening on the SCB.
© 2010 Juniper Networks, Inc. All rights reserved.
i
l
i b
CONFIDENTIAL
i
i
FSSSRX5800
www.juniper.net | 90