Course Objectives - Juniper SRX5600 Installation And Initial Configuration Manual

Course Objectives

On completing this course, you will be able to install or replace the following:
• SRX5800 Services Gateway
• Switch Control Board (SCB) • Switch Control Board (SCB)
• Routing Engine (RE)
• I/O Cards (IOCs)
• Services Processing Cards (SPCs) Services Processing Cards (SPCs)
• Small form-factor pluggable transceivers (SFPs)
• 10-Gigabit small form-factor pluggable transceivers (XFPs)
• Craft interface Craft interface
• Front and rear fan trays
© 2010 Juniper Networks, Inc. All rights reserved.
CONFIDENTIAL
www.juniper.net | 5
FSSSRX5800