Connecting Ioc Cables - Juniper SRX5600 Installation And Initial Configuration Manual
Services gateway
Hide thumbs
Also See for SRX5600:
- Hardware manual (483 pages) ,
- Manual (34 pages) ,
- User manual (34 pages)
Table of Contents
Advertisement
Connecting IOC Cables
• Ensure that you have the correct cable type for your IOC.
• If the cable connector is covered by a rubber safety plug, remove the plug. Remove the
safety caps from the ends of the cable.
• Insert the appropriate cable connector into the port on the IOC faceplate.
• Arrange the cable to prevent it from dislodging or developing stress points. Secure the
cable so that it does not support its own weight while hanging to the floor. Place excess
cable so that it does not support its own weight while hanging to the floor Place excess
cable out of the way in a neatly coiled loop.
© 2010 Juniper Networks, Inc. All rights reserved.
CONFIDENTIAL
www.juniper.net | 36
FSSSRX5800
Advertisement
Table of Contents
