Removing A Routing Engine - Juniper SRX5600 Installation And Initial Configuration Manual

Removing a Routing Engine

• Flip the ejector handles outward to unseat the Routing Engine.
• Grasp the Routing Engine by the ejector handles, and slide it about halfway out of the
chassis. h i
• Place one of your hands underneath the Routing Engine to support it, and slide it
completely out of the chassis.
• Place the Routing Engine in the electrostatic bag or on the antistatic mat.
© 2010 Juniper Networks, Inc. All rights reserved.
CONFIDENTIAL
www.juniper.net | 88
FSSSRX5800