Labelling The Nameplates; Setting The Volume Of Microphone And Loudspeaker - TCS PAK Product Information

3/2013
Please find the templates under:
www.tcsag de > Downloads > Produktnutzung >
Vorlagen für Namensschildbeschriftungen >
Namensschildbeschriftung Außenstationen der Serien
PAK und PUK.
1. Fill in the required names into the template. Print out
the name tags on the special foil* and cut them to size.
Or label the enclosed tags.
2. Push the cut tags from above into the gabs in the
name plate glass. For an easy insertion, use the inser-
tion aid (plastic platelet, within the scope of delivery), to
open the gabs.
The inserted in name tags stand 2 mm above the gab and
can be easily pulled out upwards.
We recommend, printing the name tags on a resistant special foil.
*
The foils can be ordered directly at TCS: Printable polyester foil
for name tags DIN A4, see also Accessory, page 16

Setting the volume of microphone and loudspeaker

!
Use the enclosed small screwdriver for the setting!
Ex works the volumes are adjusted on an aver-
age. A change isn't always necessary.
Please observe when adjusting:
The volume of loudspeaker and microphone
cannot be adjusted independently of each other.
When the volumes are too high, there is a back
coupling effect (whistling).
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94 - 9 88 11 88
Fax: +49 (0) 41 94 - 9 88 129  E-Mail:
9

Labelling the nameplates

.
hotline@tcsag.de
gab for
nameplate
nameplate
nameplate glass
volume control
microphone loudspeaker
control the control the
volume at the volume at the
indoor station front-door station
Subject to technical changes.
PI_PAK_uk 1A