Cleaning - TCS ISH3030 Product Information

07/2013
1
Press shortly
2
Press until a delete tone sounds after 6 sec
3
oder
establish voice communication
to the front-door station
4
Press shortly
1) If there sounds a Progsperr tone instead, the front-door station got a promgramming lock.
The programming lock can be unlocked only with the Service Device TCSK-01 or the configuration software configo™
2) New developed front-door stations (from 2009 on) respond to that with a positive acknowledgement, if the serial num-
ber of the indoor station was received (see product information of the front-door station).
*) device-specific indication modes of the front-door stations see product information of the front-door station
Avoid water from entering the device!
!
Do not use any abrasive detergents!
Clean the device with a dry or slightly wet cloth.
Remove stronger stains with a standard plastic cleaner.
TCS TürControlSysteme AG
Mail: hotline@tcsag.de
LED blinks
◄6s►
1)
Programming via voice coummunication
press button shortly..
2)
LED is ON
15
initiate
Programming mode of the system is ON
Delete a button
End programming
Programming mode of the system is OFF *

Cleaning

... until a ring tone sounds at the front-
door and indoor station
Subject to technical changes.
ISH3030-0140 UK 2A
1)
)