Open the device
Remove the handset cord.
There is a rectangular release opening at
the underside of the device. Insert a small
screwdriver straight and with slight pressure
into this opening.
The upper cover can be removed at the
underside (1).
Lift the upper cover out of the two upper
adjustment increments (2).
Installation of extended functions
TRE1
The extended functions (and the antenna) have to be fixed with adhesive pads in the
indoor station (see also product information of the corresponding extended function).
TCS TürControlSysteme AG
Mail: hotline@tcsag.de
8
radio transmitter board
FFS3100
2
1
radio interface FBI4200
Subject to technical changes.
ISH3030-0140 UK
2A
07/2013