Adjusting The Volume Of Microphone And Loudspeaker; Labelling The Name Tags - TCS PUK Series Product Information

Adjusting the volume of microphone and loudspeaker

!
For adjustments, use the enclosed screwdriver!
Ex works the volumes are adjusted on an aver-
age. A change isn't always necessary.
Please observe when adjusting:
The volume of loudspeaker and microphone
cannot be adjusted independently of each other.
When the volumes are too high, there is a back
coupling effect (whistling).
Please find the templates under:
www.tcsag de \ Downloads \ Produktnutzung \ Vorlagen
für Namensschildbeschriftungen \ Namensschildbeschrif-
tung Außenstationen der Serien PAK und PUK
1. Fill in the required names into the template. Print out
the name tags on the special foil* and cut them to size.
Or label the enclosed tags.
2. Push the cut tags from above into the gabs in the
name plate glass. For an easy insertion, use the inser-
tion aid (plastic platelet, within the scope of delivery), to
open the gabs.
The inserted in name tags stand 2 mm above the gab and
can be easily pulled out upwards.
* We recommend, printing the name tags on a resistant special foil. The
foils can be ordered directly at TCS:
Printable polyester foil for name tags DIN A4.
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
FAX: +49 (0) 41 94/ 9 88 129  Mail: info@tcsag.de
8

Labelling the name tags

volume control
microphone loudspeaker
control the control the
volume at the volume at the
indoor station front-door station
gab for
name tag
name tag
name plate glas
Subject to technical changes.
PI_PUK-uk 1 A
11/2012