Polaris 800 INDY XC 129 2019 Owner's Manual page 95

3. Test the throttle lever by compressing and releasing it several times. The
lever and cable must return to the idle position quickly and completely.
4. If the throttle lever operates properly, turn the ignition switch on and go
through normal starting procedures.
5. If the engine doesn't start, your authorized POLARIS dealer can perform this
service.
Excessive freeplay in the throttle cable may cause the safety switch to activate,
preventing the engine from starting. If this occurs, return the snowmobile to an
authorized POLARIS dealer for service.
If an emergency exists and it's necessary to start the engine, the throttle safety
switch and engine stop switch may be disconnected from the wire harness.
When these switches are disconnected, the ignition key switch must be used to
shut off the engine. DO NOT continue to operate the snowmobile with the throttle
safety switch disconnected. Return the snowmobile to an authorized POLARIS
dealer for service as soon as possible.
ENGINE STOP SWITCH
Push down on the engine stop switch
to ground out the ignition and stop the
engine quickly. Pull the switch up to the
ON position to allow restarting.
THROTTLE SAFETY SWITCH
The throttle safety switch is designed to
stop the engine whenever all pressure
is removed from the throttle lever and
the throttle cable or valves do not return
to the normal closed position.
q
OPERATION
93