Polaris 800 INDY XC 129 2019 Owner's Manual page 61

CHANGING TO A NEW SECURITY CODE
Any time you wish to change your current security code to a new code, perform
TASK 2 through TASK 4 of the First Time Use of Your Security System
procedure. Instead of using the factory default code "000" in TASK 2 and TASK
3, use your current security code.
SECURITY SYSTEM ACCESS QUICK REFERENCE
Now that you have become familiar with the procedure for locking and unlocking
the system, use the chart below as a quick reference.
SECURITY SYSTEM ACCESS QUICK REFERENCE CHART
Action
1. Start engine
2. Press and hold the
center
3. Press and release the
SET button until
SECURITY appears in
information display
area.
4. Press and release
SET button.
Press and release the
SET button
Press and hold the SET
button
While SECURITY OFF is
shown on the information
display area,
simultaneously Press and
hold the MODE and SET
button.
Displays ENTER CODE (to lock the system)
button
Advances a digit on the ENTER CODE screen
Accepts a digit and displays the next digit
position (if any remain) on the ENTER CODE
screen
Allows user to change security code.
Result
GAUGE
59