Polaris 800 INDY XC 129 2019 Owner's Manual page 90

OPERATION
5. Release the throttle.
6. Restart the engine using the normal starting procedure.
BREAK-IN PERIOD
ENGINE BREAK-IN
The recommended break-in period is the time required to use the first full tank of
fuel.
Excessive heat build-up during the first three hours of operation will damage
close-fitted engine parts. Do not operate at full throttle or high speeds for
extended periods during the first three hours of use. Vary the throttle openings
and vehicle speeds to reduce friction on all close-fitting machined parts, allowing
them to break in slowly without damage.
The engine management system utilizes both a fuel injector break-in period and
oil pump enrichment program. The duration of these break-in programs is
independent of each other and is timed out based on engine run time.
Regardless of these automatic engine break-in and enrichment features, the
following engine break-in procedures must be performed when the engine is
new or overhauled.
During this period of increased oiling, sled performance will not be affected and
BREAK-IN FUNCTION
Fuel Injectors
600 Models Oil Pump Enrichment
800 Models Oil Pump Enrichment
First Tank of Fuel:
After Break-in:
Extreme Arctic Conditions,
sustained temperature is at or
below -40° F (-40° C)
88
you should ride normally.
Period
Period
* = Total engine run time above 5,500 RPM
OIL RECOMMENDATIONS
NOTE
ENGINE
RUN TIME
2 Hours
5 Hours *
18 Hours *
POLARIS VES 2-Cycle Oil
POLARIS VES 2-Cycle Oil
VES Extreme 2-Cycle Oil
DESCRIPTION
Additional fuel
Enriched oil supply
to engine