MAINTENANCE
HOOD
To remove the hood, do the following:
1. Remove the left and right side panels.
q
2. Rotate the 1/4 turn fasteners
at the rear corners if the hood.
e
3. Disconnect the hood wire harness connector
.
4. Remove the hood assembly from the vehicle.
NOTE
Store the hood in a position that will not damage the brake cooler duct.
INTAKE FILTERS
q
The intake foam filters
limit snow
ingestion into the intake system. When
operating in loose powder snow, check
the foam filters periodically to remove
any accumulation of snow.
FUEL PUMP
All fuel pump service must be performed by an authorized POLARIS dealer. Do
not attempt to service the fuel pump.
107