Polaris 800 INDY XC 129 2019 Owner's Manual page 74

THE PERFECT FIT
HANDLE BAR EXAMPLES
HANDLEBAR COMPONENT FASTENER TORQUES
Moving a handlebar component without first loosening its screws/set screws
may cut grooves into the handlebar, making it difficult to secure the
component. Do not move a handlebar component without first loosening its
mounting screws/set screws. Take care to avoid damaging hand warmer/brake
COMPONENT
Left Handlebar Control Block
q
Brake Lever / Master Cylinder
w
Torque the front screw first, then
torque the screw next to the reservoir.
Upper / Lower Riser Clamps
e
r Throttle Lever Block Set Screw
Throttle Lever Block Cover Screws
t
y Auxiliary Engine Stop Switch Set Screw
u Riser
72
IMPORTANT
switch wires when moving components.
TORQUE
DO NOT OVER-TIGHTEN
20 in-lbs (2.3 Nm)
70 in-lbs (7.9 Nm)
14.8 ft-lbs (20 Nm)
27 in-lbs (3.1 Nm)
6 in-lbs (0.7 Nm)
12 in-lbs (1.4 Nm)
Install with the "FWD" stamp facing
toward the hood