FRONT TRACK SHOCK SPRING SETTINGS
Factory settings, combined with user adjustments to the rear torsion spring,
should be all that's necessary to provide the best riding experience for most
riders. The primary adjustment for overall vehicle balance is the rear torsion
spring preload. Perform this adjustment first.
Always perform shock spring preload adjustments with the weight of the vehicle
removed from the shock and with the shock at full extension.
Never adjust spring preload to an installed length longer than the factory length
or shorter than the minimum length as shown in the following chart. Damage to
the suspension could result. When decreasing preload, make sure at least two
turns of preload are holding the retainer against the spring.
INDY SP
FRONT TRACK SHOCK SPRING SETTINGS
FACTORY SPRING
INDY SP
INDY XC
FRONT TRACK FACTORY CLICKER SETTINGS
MODEL
INDY SP
INDY XC
NOTICE
MAXIMUM
INSTALLED LENGTH
1.25" (3.2 cm)
1.5" (3.8 cm)
THE PERFECT FIT
INDY XC
MINIMUM INSTALLED
LENGTH
0.75" (1.9 cm)
1" (2.5 cm)
CLICKER SETTING
(FROM FULL HARD)
N/A
5
69