8. Remove the battery shield
9. Remove the battery from the battery bracket.
BATTERY INSTALLATION
When installing a new battery, make sure it's fully charged prior to its initial use.
Using a new battery that has not been fully charged can damage the battery and
result in a shorter life. It can also hinder vehicle performance. Follow the battery
charging instructions before installing the battery. See page 131.
1. Ensure that the battery is fully charged.
2. Set the battery in the battery holder.
3. Place the battery shield on the battery bracket. Install the screw to secure the
shield.
4. Install the battery hold-down strap.
5. Connect and tighten the red (positive) cable first.
t
.
TORQUE
7 ft-lbs (10 Nm)
MAINTENANCE
129