Polaris 800 INDY XC 129 2019 Owner's Manual page 68

THE PERFECT FIT
SHOCK LOCATIONS
q
Rear Track Shock
w
Front Track Shock
e
Front IFS Shock
SHOCK COMPRESSION DAMPING
The primary adjustment for overall vehicle balance is torsion spring preload.
Perform this adjustment first. After adjusting torsion spring preload to your
satisfaction, compression damping adjustments can be made to control ride
quality and bottoming resistance.
Compression damping can be adjusted at the front suspension and at the front
and rear track shock. Make adjustments in 2-click increments, then test ride.
When adjusting the front suspension, always adjust both clickers equally.
To stop bottoming of the front or rear suspension (stiffer ride), rotate the clicker
(s) clockwise two clicks (as viewed from the top of the clicker), then test ride.
Repeat the adjustment until bottoming stops and the desired ride quality is
achieved.
For a more plush ride at the front or rear suspension, rotate the clicker(s)
counter-clockwise two clicks, then test ride. Repeat the adjustment until the
desired ride quality is achieved.
66