THE PERFECT FIT
RISER ANGLE
Riser angle can be adjusted to suit rider
preference.
1. Loosen the four bolts on the bottom
of the adjuster block
pry the blocks apart with a
screwdriver.
2. Adjust the riser forward or rearward
to the desired position.
3. Tighten the bolts to 14.8 ft-lbs (20
Nm).
ADJUSTABLE RISER (IF EQUIPPED)
To adjust the riser (if equipped), do the
following:
1. Release the riser clamp
2. Adjust the handlebar upward or
downward to the desired height.
3. Secure the riser clamp
Periodically inspect the torque of the upper/lower handlebar clamp fasteners,
and slide fasteners.
74
w
. If necessary,
q
.
q
.
TORQUE
Handlebar Clamp Fastener Torque:
16 ft-lbs (21 Nm)
ROX Slide Fastener Torque:
16 ft-lbs (21 Nm)
Adjuster Cranks:
Hand Tight