Polaris 800 INDY XC 129 2019 Owner's Manual page 106

MAINTENANCE
1. Elevate the front of the snowmobile using a floor jack or appropriate lift.
2. Remove the fill plug. Clean all metal shavings off the plug.
3. Insert the tube of a hand pump oil extractor into the fill hole. Direct the hose
toward the bottom front area of the cover, away from the chain/sprocket.
4. Extract the oil from the chaincase.
5. Lower the snowmobile.
6. Using a funnel, slowly add the recommended oil until the fluid begins to
overflow. Maximum fluid capacity is 10.5 oz. (310 ml).
7. Clean the area with a clean, dry shop towel.
8. Reinstall the fill plug.
OIL CHANGE (COVER DRAIN METHOD)
1. Position the snowmobile on a level surface.
2. Remove the two (2)screws securing the fender to the chaincase
3. Remove the right side panel. If equipped with a battery, remove the battery.
4. Place a drain pan under the chaincase.
104
TORQUE
4-4.9 ft-lbs (5.4-6.6 Nm)
q
.