H5: Memobus/Modbus Serial Communication - YASKAWA V1000 Series Technical Manual

No.
H4-01 Multi-Function Analog 1 (Terminal AM Monitor Selection)
Note: If terminal AM is not used or is used as a through-put, then set H4-01 to 000 or 031.For information on available monitors and settings,
H4-02: Multi-Function Analog 1 (Terminal AM Output Gain)
n
H4-03: Multi-Function Analog 1 (Terminal AM Output Bias)
n
Sets the gain and bias of the voltage level output from terminal AM.
No.
H4-02 Multi-Function Analog 1 (Terminal AM Output Gain)
H4-03 Multi-Function Analog 1 (Terminal AM Output Bias)

H5: MEMOBUS/Modbus Serial Communication

u
Serial communication can be performed with programmable logic controllers (PLCs) or similar devices using the MEMOBUS/Modbus protocol.
H5-01: Drive Node Address
n
Parameter Overview
No.
H5-01 Drive Node Address
H5-02: Communication Speed Selection
n
Parameter Overview
No.
H5-02 Communication Speed Selection
H5-03: Communication Parity Selection
n
Parameter Overview
No.
H5-03 Communication Parity Selection
H5-04: Stopping Method after Communication Error
n
Parameter Overview
YASKAWA ELECTRIC SIEP C710606 18A YASKAWA AC Drive – V1000 Technical Manual (Preliminary)
Parameter Name
Parameter Name
gain 100%
0 V
bias -100%
Figure 5.67 Analog Output Gain/Bias Setting
Name
Selects drive station node number (address) for MEMOBUS/Modbus terminals
R+, R-, S+, S-. Cycle power for the setting to take effect.
Name
Selects the baud rate for MEMOBUS/Modbus terminals R+, R-, S+ and S-. Cycle
power for the setting to take effect.
0 : 1200 bps
1 : 2400 bps
2 : 4800 bps
3 : 9600 bps
4 : 19200 bps
5 : 38400 bps
6 : 57600 bps
7 : 76800 bps
8 : 115200 bps
Name
Selects the communication parity for MEMOBUS/Modbus terminals R+, R-, S
+ and S-. Cycle power for the setting to take effect.
0: No parity
1: Even parity
2: Odd parity
Setting Range
000 to 999
Setting Range
-999.9 to 999.9
-999.9 to 999.9
output voltage
5 V 10 V
Description
Description
Description
5.7 H: Terminal Functions
Default
102
U1: Status Monitors.
Default
100.0%
0.0%
Range Default
0 to 20 H 1F
Range Default
0 to 8 3
Range Default
0 to 2 0
5
183