VERSION 08/2015
OPERATING AND ASSEMBLY MANUAL
9.2
TYPES OF FAULT MESSAGES
Warnings:
Warning messages are displayed in yellow in the visualization but do not cause the system
to be stopped. The warning is reset automatically (without acknowledgement) when the
warning state has been resolved.
Faults:
Error messages are displayed in red in the visualization.
Faults cause the system to be stopped.
System stop in the case of faults:
Reaction to a fault in the system:
Faulty devices are switched off and the "Powder center OK" outlet is set to "LOW".
9.3
CURRENT
Time
No.
Wagner bigbag: malfunction
Warning linear motion unit not referenced ==> Move to the top manually
Current
History
ORDER NUMBER DOC2350372
Worker
Description
Confi rm
1. Press the "Alarm" button in the right-hand
menu bar to activate the function.
2. The "Current alarms" page is displayed.
Home page
3. To reset the error, press the "Confi rm"
button.
Cleaning
Settings
Alarm
PXM
89