Cleaning/Paint Change On The Pxm With Ultrasonic Sieve - WAGNER PXM Operating And Assembly Manual

VERSION 08/2015
OPERATING AND ASSEMBLY MANUAL
8.2.6

CLEANING/PAINT CHANGE ON THE PXM WITH ULTRASONIC SIEVE

Notes for the paint change sequence:
The ultrasound sieve can be cleaned either manually or using existing cleaning components.
Three steps are planned:
Coarse cleaning using the internal cleaning program of the IP 5000 fresh powder
pump. The screen frame can remain installed.
Main cleaning with blowout device and compressed air pulses (see Cleaning
Parameters, Chapter 6.9.2). The sieve frame must be replaced with a dummy frame to
avoid damage to the sieve fabric.
Perform a manual fi nal cleaning of the individual components.
P_02682
1. Plug the outlet hose to the park position.
2. Clean IP 5000 internally.
ORDER NUMBER DOC2350372
Injector blow out
FP pump standard
FP pump intensive
US Sieve
RP hose
Worker
On Off
On Off
End
On Off
On Off
On Off
PXM
Home page
Cleaning
Settings
Alarm
82