Assembly And Installation - WAGNER PXM Operating And Assembly Manual

VERSION 08/2015
OPERATING AND ASSEMBLY MANUAL
P_02573
Transport in the factory workshop
6.5

ASSEMBLY AND INSTALLATION

Danger from electric current!
Risk of injury and damage to the device.
The device may only be put into operation if it complies with the essential requirements of
Directive 2006/42/EC after installation.
The requirements of the relevant paragraphs must be met in particular:
– 1.1.4 Illumination
– 1.2.4.1 Normal shutdown
– 1.2.4.3 Emergency shutdown
– 1.2.4.4 Assemblies of machinery
– 1.2.5 Selecting the control or operating modes
– 1.2.6 Power supply malfunction
– 1.3.7 Risks from moving parts
– 1.3.8 Selection of protective equipment against risks from moving parts
– 1.5.6 Fire
– 1.5.16 Lightning
– 1.7.1.2 Warning devices
ORDER NUMBER DOC2350372
WARNING
Before connecting the device, ensure that the external controller
is switched off and the EMERGENCY STOP button is actuated.
P_02574
Support with wooden beams on the
fi lter module
PXM
32