Maintenance; Maintenance Staff; Safety Instructions - WAGNER PXM Operating And Assembly Manual

VERSION 08/2015
OPERATING AND ASSEMBLY MANUAL
8.3

MAINTENANCE

8.3.1

MAINTENANCE STAFF

Maintenance work should be undertaken regularly and carefully by qualifi ed and trained
staff . They should be informed of specifi c hazards during their training.
The following hazards may arise during maintenance work:
Health hazard from inhaling powder lacquer
Use of unsuitable tools and aids
Danger due to residual pressure in compressed-air lines
Once the maintenance work is complete, the device must be checked by a qualifi ed person
to ensure a reliable condition.
8.3.2

SAFETY INSTRUCTIONS

Incorrect maintenance/repair!
Danger to life and equipment damage.
ORDER NUMBER DOC2350372
DANGER
Only a WAGNER service center or a suitably trained person may
carry out repairs and replace parts.
Only repair and replace parts that are listed in the Chapter
"Spare parts" and that are assigned to the unit.
Before all work on the device and in the event of work
interruptions:
- Switch off the energy supply and the compressed air supply.
- Relieve spray gun and device pressure.
- Secure the spray gun against actuation.
Observe the operating and service manual for all work.
PXM
85