Epg S2 Settings - WAGNER PXM Operating And Assembly Manual

VERSION 08/2015
OPERATING AND ASSEMBLY MANUAL
6.9.4

EPG S2 SETTINGS

Normally, these settings have been made prior to shipment. The description is for reference
purposes only and when an error message is displayed.
Air input
Lufteingang
Prim. Fuse
Sicherung
1.0 AT
(slow blow)
Mains power IN / OUT
Netz EIn / Ausgang
B
Feeding air
Förderluft
P_02714
ORDER NUMBER DOC2350372
Do NOT connect or disconnect
Made in Switzerland
when ENERGIZED !
J. Wagner AG
CH 9450 Altstätten
Controller is suitable for Class II,
Division 2, Hazardous (Classified)
Type / Typ: 0102 EPG S2 FM
locations.
Voltage:
90-250 VAC 47-63 Hz For operation all ports must be fitted
Spannung:
with a plug or the protection cap.
Line Power:
max. 65 W
Eingangsleistung:
FM approved for CL II, Div 2 Grps E, F, & G
Ambient temp range 5C to 45C T5
Use in accordance with
Overvoltage Category II
2309729
control document:
and pollution Degree 2
Serial No.:
Serie Nr.:
B
Dosage air Atomizing air Feeding air
Dosierluft Zerstäuberluft Förderluft
CAN bus node ID setting
CAN bus baud rate setting/emergency operation mode
B
Spraygun
Output to gun
Sprühpistole
Ausgang zur Pistole
U max. 22 Vpp
I max. 0,9 A
IN CAN Bus OUT
Data and Interlock
Daten und Verriegelung
A A
Dosage air Atomizing air
Dosierluft Zerstäuberluft
A
PXM
42