VERSION 08/2015
OPERATING AND ASSEMBLY MANUAL
9
TROUBLESHOOTING AND RECTIFICATION
Incorrect maintenance/repair!
Danger to life and equipment damage.
9.1
FAULT MESSAGES
The "Alarm" function can be used to display the fault messages. Either the fault active at
that time or all fault messages can be displayed.
The date, reset time, module, fault code, and a brief text are displayed.
ORDER NUMBER DOC2350372
DANGER
Only a WAGNER service center or a suitably trained person may
carry out repairs and replace parts.
Only repair and replace parts that are listed in the Chapter
"Spare parts" and that are assigned to the unit.
Before all work on the device and in the event of work
interruptions:
- Switch off the energy supply and the compressed air supply.
- Relieve spray gun and device pressure.
- Secure the spray gun against actuation.
Observe the operating and service manual for all work.
PXM
88