Equipment With Integrated Exhaust System - WAGNER PXM Operating And Assembly Manual

VERSION 08/2015
OPERATING AND ASSEMBLY MANUAL
7.3.2

EQUIPMENT WITH INTEGRATED EXHAUST SYSTEM

1
14 13
1 Peristaltic pump On/Off
2 Exhaust system status
3 Ultrasonic sieve device On/Off
4 Language selection
5 Reciprocator Up/Down
6 Manual/automatic mode
7 Illumination On/Off
8 Button for clamping the tank (box, powder container)*
9 Replenishing fresh powder (manual, time-controlled) On/Off
10 Workstation/vibrator fl uidization On/Off
11 Automatic fi lter cleaning On/Off
12 Automatic fresh powder supply On/Off (only in automatic mode)
13 Exhaust system On/Off // Switchover frequency
Press the button briefl y: Switch on suction
Press the button briefl y when suction is switched on: Switchover frequency ventilator
Press and hold the button: Switch off suction
14 Bigbag fresh powder On/Off , as an alternative to the fresh powder supply from the
box
* Additional actuation of the safety switch for two-handed operation below the touch
screen required
ORDER NUMBER DOC2350372
2 3 4 5
12 11 10 9
6
P_02529
8 7
PXM
48