Genie Z-33/18 Operator's Manual page 36

Operator's Manual
Operating Instructions
Emergency Stop
Push in the red Emergency Stop button to the
off position at the ground controls or the platform
controls to stop all machine functions.
Repair any function that operates when either red
Emergency Stop button is pushed in.
Selecting and operating the ground controls will
override the platform red Emergency Stop button.
34
Emergency Power
Use emergency power if the primary power source
fails.
1 Turn the key switch to ground or platform
control.
2 Pull out the red Emergency Stop button to the
on position.
3 Press down the foot switch when using the
controls from the platform.
4 Simultaneously hold the emergency
power switch to either side and
activate the desired function.
The drive function will not operate with auxiliary
power.
Operation from Ground
1 Turn the key switch to ground control.
2 Pull out the red Emergency Stop button to the
on position.
To Position Platform
1 Push and hold the function enable
button.
2 Move the appropriate toggle switch
according to the markings on the control panel.
Drive and steer functions are not available from the
ground controls.
Z-33/18
First edition • First Printing
Part No. 1257143