Genie Z-33/18 Operator's Manual page 21

First edition • First Printing First edition • First Printing
Ground Control Panel
1 Platform level switch
Move the platform level
switch up and the level of
the platform will raise. Move
the platform level switch
down and the level of the
platform will lower.
2 Turntable rotate switch
Move the turntable rotate
switch to the down and the
turntable will rotate to the
right. Move the turntable
rotate switch to the up and
the turntable will rotate to the
left.
3 Primary boom extend/retract switch
Move the primary boom
extend/retract switch to the
right and the primary boom
will retract.Move the boom
extend/retract switch to the
left and the primary boom
will extend.
4 Primary boom up/down switch
Move the primary boom up/
down switch up and the boom
will raise. Move the primary
boom up/down switch down
and the boom will lower.
5 Platform overload indicator light
Light flashing indicates the platform is
overloaded and no functions will operate.
Remove weight until the light goes off.
Part No. 1257143
6 Key switch for platform/off/ground selection
Turn the key switch to the platform position
and the platform controls will operate. Turn the
key switch to the off position and the machine
will be off. Turn the key switch to the ground
position and the ground controls will operate.
7 Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions. Pull out the red
Emergency Stop button to the on position to
operate the machine.
8 Secondary boom up/down switch
Move the secondary boom
up/down switch up and the
secondary boom will raise.
Move secondary boom up/
down switch down and
the secondary boom will
lower.
9 Function enable button
Press and hold the function enable button to
enable the functions on the ground control
panel to operate.
10 Emergency lowering switch
Use emergency power if the primary power
source fails. Simultaneously hold the
emergency lowering switch to either side and
activate the desired function.
11 Hour meter
Z-33/18
Operator's Manual Operator's Manual
Controls
19