Genie Z-33/18 Operator's Manual page 15

First edition • First Printing
Operation on Slopes Hazards
Do not drive the machine on a slope that exceeds
the maximum uphill, downhill or side slope rating
of the machine. Slope rating applies only to
machines in the stowed position.
Maximum slope rating, stowed position
Platform downhill
Platform uphill
Side slope
Note: Slope rating is subject to ground conditions
and adequate traction. See Driving on a Slope in
the Operating Instructions section.
Fall Hazards
Occupants must wear a
safety belt or harness in
accordance with
governmental regulations.
Attach the lanyard to the
anchor provided in the
platform.
Do not sit, stand or climb
on the platform guard
rails. Maintain a firm
footing on the platform
floor at all times.
Part No. 1257143
Keep the platform floor clear of debris.
30% (17°)
Lower the platform entry mid-rail or close the entry
20% (11°)
gate before operating.
25% (14°)
Do not enter or exit the platform unless the
machine is in the stowed position and the platform
is at ground level.
Collision Hazards
Be aware of the boom position and tailswing when
rotating the turntable.
Z-33/18
Operator's Manual
Work Area Safety
Do not climb down from
the platform when raised.
Be aware of limited sight
distance and blind spots
when driving or operating.
Check the work area for
overhead obstructions or
other possible hazards.
13