Applying Special Effects (Effects On The Overall Signal); Defocus Settings - Sony XVS-9000 User Manual

Modifying the combination pattern
For details about modifying patterns, see the following
pages.
• "Setting the aspect ratio of the wipe crop pattern
(Aspect)" (page 236)
• "Replicating the wipe crop pattern (Multi)" (page 236)
• "Rotating the wipe crop pattern (Rotation)" (page 236)
• "Applying modulation to the wipe crop pattern
(Modulation)" (page 236)
Applying Special Effects
(Effects on the Overall
Signal)

Defocus Settings

Applying the Defocus effect
1
Open the DME >Video Modify >Defocus/Blur menu
(4121).
2
Press [Defocus], turning it on.
3
In the <Defocus Mode> group, select the signal to
which to apply the defocus effect.
Video/Key: Video signal and key signal
Video: Video signal only
4
Set the following parameters.
When [Video/Key] is selected
No. Parameter Adjustment
1 H
2 V
3 All
When [Video] is selected
No. Parameter Adjustment
1 H
2 V
3 All
5
To cancel black level leaking that can occur at the edge
of the screen when the Defocus effect is enabled, press
[Clean Defocus], turning it on.
To mask the Defocus effect with a selected
pattern
Press [Mask] to open the DME >Video Modify >Mask
menu (4127), and set the type of pattern and modifiers (see
page 243).
238
Simultaneous horizontal
defocusing of video and key signals
Simultaneous vertical defocusing
of video and key signals
Simultaneous horizontal and
vertical defocusing of video and
key signals
Horizontal defocusing of video
signal
Vertical defocusing of video signal
Horizontal and vertical defocusing
of video signal