Sony XVS-9000 User Manual page 367

Menu macro register number
Menu macro register name
Event number
Menu macro creation
event list
To scroll the events display in the menu macro
register creation list
You can scroll the "Data" field display for an event
horizontally to check the content.
Select the target event, and then scroll the display using the
[H Scroll] parameter.
Creating a new menu macro
1
Select an empty menu macro register and display the
Menu Macro Edit menu (7144.2).
For details about the method of operation, see "To
display the Menu Macro Edit menu" (page 366).
2
If required, press [Auto Insert] to enable/disable auto
insert mode.
3
Create an event (carry out the menu operation you
want to register as an event in the menu macro).
For details about menus that can be registered, see
"Menu macro events" (page 365).
When auto insert mode is enabled, the event is
registered automatically.
When auto insert mode is disabled, press [Insert
Before] or [Insert After] to register the event.
4
Repeat steps 2 and 3 to register the required events in
the menu macro.
5
Remaining Memory
6
7
To insert a pause event
1
Menu macro register
creation list
2
Editing a menu macro
1
2
3
4
367
Set the event execution interval.
No. Parameter Adjustment
5 Interval Event interval (seconds)
Time (Sec)
The settings are applied to each menu macro register.
Press [Store].
To exit editing mode without saving a menu macro
Press [Exit].
Enter a menu macro register number as required in the
numeric keypad window, and press [Enter].
The created menu macro is saved in the specified
register.
Set the pause time.
No. Parameter Adjustment
4 Pause Pause duration (seconds)
Time (Sec)
Press [Pause Set].
When auto insert mode is enabled, the pause event is
registered automatically.
When auto insert mode is disabled, press the [Insert
Before] or [Insert After] button to register the pause
event.
Select the target menu macro register and display the
Menu Macro Edit menu (7144.2).
For details about the method of operation, see "To
display the Menu Macro Edit menu" (page 366).
Select the event you want to edit.
If required, press [Auto Insert] to enable/disable auto
insert mode.
Carry out the editing operations.
When auto insert mode is enabled: Menu operations
are automatically inserted after the selected event.
When auto insert mode is disabled: Perform one of
the following.
• To overwrite the selected event, carry out the
new menu operation, then press [Modify].
• To insert an event before the selected event,
carry out the new menu operation, then press
[Insert Before].