Sony XVS-9000 User Manual page 130

Reducing, enlarging, rotating, and moving
keys (device control block)
Channel selection buttons
Mode selection buttons
LOC SIZE X, Y, Z buttons
button
RSZR ON button
ROT button
ASP PERS button
Device control block (trackball)
1
Press the [M/E1] button.
The [M/E1] button turns on green, and the M/E-1 bank
switches to resizer operation mode.
Notes
• Pressing the [M/E1] to [M/E5] and [P/P] mode
selection buttons switches the selected bank to
resizer operation mode.
• You can select more than one button. The first
selected button becomes the reference, and is lit
green. Subsequent selected buttons are lit amber.
2
Press the [K1RSZ] button.
The [K1RSZ] button turns on green, and key 1
becomes the target of resizer operation.
Notes
• The [K1RSZ] to [K8RSZ] channel selection buttons
correspond to key 1 to key 8.
• You can select more than one button. The first
selected button becomes the reference, and is lit
green. Subsequent selected buttons are lit amber.
3
Press the [RSZR ON] button, turning it on.
The target resizer is enabled.
FINE button
Z-ring
Trackball
130
4
Select the function to be set.
To change the aspect ratio of the key: Press the [ASP
PERS] button, turning it on.
To reduce/enlarge or move the key: Press the [LOC
SIZE] button, turning it on.
To rotate or change the perspective of the key:
Press the [ROT] button, turning it on. To specify
the direction of rotation, press the [X] button or
[Y] button. To adjust perspective, press the [Z]
button.
5
Use the trackball or Z-ring for the operation.
Pressing the [FINE] button, turning it on, enables fine
adjustment of setting values (fine mode).
Pressing the [X], [Y], or [Z] button, turning it on,
restricts operation to the selected axis or item.
The target bank and resizer, and the current parameter
and its value, are displayed in the display of the device
control block.
The functions assignable to trackball and Z-ring
operations are shown in the following table.
Operation Trackball
buttons (horizontal
(Parameter) rotation)
[X] button
ASP PERS Change
(ASP) aspect ratio
on X-axis
LOC SIZE Move image
(LOC SIZE) on X-axis
ROT Rotate
(ROT PERS) image on Y-
axis
To enter parameters
Operates identically to DME three-dimensional parameter
input.
For details, see "Three-Dimensional Parameter Entry"
(page 224).
To reset parameters
Operates identically to DME three-dimensional parameter
reset.
For details, see "Resetting three-dimensional
parameters" (page 224).
To return the resizer to default state (clear work
buffer)
To clear and reset to default state only the two-dimensional
transform and rotation parameters contained in the work
buffer, depending on the resizer operation, press the [CLR
WORK BUFR] button in the device control block.
Trackball Z-ring
(vertical
rotation)
[Y] button [Z] button
Change Change aspect ratio
aspect ratio on X- and Y-axes
on Y-axis simultaneously
Move image Magnify and shrink
on Y-axis image
Rotate Change distance of
image on X- viewpoint position
axis