Sony XVS-9000 User Manual page 135

No. Parameter Adjustment
2 Saturation Saturation
3 Hue Hue
Setting a drop shadow
1
In the M/E-1 >Key1 >Resizer >Enhanced Effect menu
(1115.2), press [Dual Rszr Effect], turning it on.
2
Press [Drop Shadow], turning it on.
3
Set the following parameters.
No. Parameter Adjustment
1 H Horizontal position of shadow
2 V Vertical position of shadow
3 Size Size
a)
4 Soft Softness
5 Density Density of shadow
a) Common to the [Soft] wide key border parameter.
Setting an edge enhance
Adjusting the gain sharpens the image.
1
In the M/E-1 >Key1 >Resizer >Enhanced Effect menu
(1115.2), press [Edge Enhance], turning it on.
2
Set the following parameters.
No. Parameter Adjustment
1 H Horizontal gain adjustment
2 V Vertical gain adjustment
3 All Horizontal and vertical adjustment
Setting a mosaic
1
In the M/E-1 >Key1 >Resizer >Enhanced Effect menu
(1115.2), press [Mosaic], turning it on.
2
Set the following parameters.
No. Parameter Adjustment
1 Size Size of tiles
2 Aspect Aspect ratio of tiles
• Negative values expand
vertically.
• Positive values expand
horizontally.
3
In the <Mosaic/Defocus Mode> group, select the
signal to which to apply the mosaic effect.
Video/Key: Video signal and key signal
Video: Video signal only
Note
Enabling mosaic and selecting [Video/Key] in the
<Mosaic/Defocus Mode> group disables crop and
mask.
To make the mosaic like a relief pattern
1
Press [Relief], turning it on.
2
Set the following parameters.
No. Parameter Adjustment
3 Gain
4 Angle
Setting a defocus
1
In the M/E-1 >Key1 >Resizer >Enhanced Effect menu
(1115.2), press [Defocus], turning it on.
2
In the <Mosaic/Defocus Mode> group, select the
signal to which to apply the defocus effect.
Video/Key: Video signal and key signal
Video: Video signal only
3
Set the parameters.
Set the defocus settings in the same way as for the
DME defocus settings.
For details, see "Defocus Settings" (page 238).
Note
Enabling defocus and selecting [Video/Key] in the
<Mosaic/Defocus Mode> group disables crop and
mask.
Setting a mask
1
In the M/E-1 >Key1 >Resizer >Enhanced Effect menu
(1115.2), press [Dual Rszr Effect], turning it on.
2
Press [Mask], turning it on.
3
Press [Mask Menu].
The Mask menu (1115.4) appears.
4
In the <Mask Source> group, select one of the
following.
Box: Use a box pattern as the mask signal.
135
Relief depth of mosaic pieces
Light source direction