Connection Wizard: Step 2: Wireless Lan - ZyXEL Communications NBG-418N v2 User Manual

Fig ure 13 Wizard Step 2: Static IP Connection
The following table describes the labels in this screen
Table 5 Wizard Step 2: Static IP Connection
L ABEL
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Back
Next
Exit
Click Ne xt to configure the WLAN for the NBG-418N v2.
3.3 C o nne c tio n Wiza rd: ST EP 2: Wire le ss L AN
Set up your wireless LAN using the following screen.
Chapter 3 Connection Wizard
DESC RIPT IO N
Select this option if you were given IP address and/or DNS server settings by the ISP.
The fixed IP address should be in the same subnet as your broadband modem or
router.
Enter the subnet mask address in this field.
Enter the gateway IP address provided by your ISP.
DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. The DNS server is extremely important because without it, you
must know the IP address of a computer before you can access it. The NBG-418N v2
uses a system DNS server (in the order you specify here) to resolve domain names for
DDNS and the time server. Enter the primary DNS server's IP address in this field.
Enter the secondary DNS server's IP address in this field. This field is optional.
Ba c k
Click to return to the previous screen.
Ne xt
Click to continue.
Exit
Click to close the wizard screen without saving.
NBG-418N v2 User's Guide
24