Ipv6 Screen - ZyXEL Communications NBG-418N v2 User Manual

Fig ure 60 Network > WAN > Advanced
The following table describes the labels in this screen.
Table 35 Network > WAN > Advanced
L ABEL
Multicast Setup
Multicast Proxy
Multicast Snooping
Auto IP Setup
Enable Auto-IP-
Change mode
Apply
Reset
7.5 IPv6 Sc re e n
Use this screen to configure your IPv6 settings. Click
Fig ure 61 Network > WAN > IPv6 (Link-local Only)
Chapter 7 WAN
DESC RIPT IO N
Multic a st Pro xy
Click the radio button to enable this function on the NBG-418N v2. This allows
an IPv6 router to discover the presence of MLD hosts who wish to receive multicast packets
and the IP address of multicast groups the hosts want to join on its network.
Click the Multic a st Sno o ping
check MLD packets passing through it and learn the multicast group membership. It helps
reduce multicast traffic.
Click Ena b le Auto - IP- C ha ng e m o de
address to 10.0.0.1 or 192.168.1.1 accordingly when the NBG-418N v2 gets a dynamic WAN
IP address in the same subnet as the LAN IP address 192.168.1.1 or 10.0.0.1.
The NAT, DHCP server and firewall functions on the NBG-418N v2 are still available in this
mode.
Click Apply to save your changes back to the NBG-418N v2.
Click Re se t to begin configuring this screen afresh.
NBG-418N v2 User's Guide
84
radio button to activate it. This allows the NBG-418N v2 to
button to have the NBG-418N v2 change its LAN IP
Ne two rk WAN IPv6
> > .