Wireless Problems - ZyXEL Communications NBG-418N v2 User Manual

23.5 Wire le ss Pro b le m s
I cannot access the NBG-418N v2 or ping any computer from the WLAN.
Make sure the wireless LAN is enabled on the NBG-418N v2.
1
Make sure the wireless adapter on the wireless station is working properly.
2
Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports the
3
same wireless standard as the NBG-418N v2.
Make sure your computer (with a wireless adapter installed) is within the transmission range of the NBG-
4
418N v2.
Check that both the NBG-418N v2 and your wireless station are using the same wireless and wireless
5
security settings.
Make sure traffic between the WLAN and the LAN is not blocked by the firewall on the NBG-418N v2.
6
Make sure you allow the NBG-418N v2 to be remotely accessed through the WLAN interface. Check
7
your remote management settings.
• See Chapter 6 Wireless LAN
I cannot access the Web Configurator after I switched to a non-router mode.
When you change from router mode to a non-router mode, you must manually give your computer an
IP address in the range between 192.168.1.3 and 192.168.1.254 as non-router mode has no LAN DHCP
server.
Refer to Appendix D on page 178
Chapter 23 Troubleshooting
for more information.
for instructions on how to change your computer's IP address.
NBG-418N v2 User's Guide
153