ZyXEL Communications NBG-418N v2 User Manual page 40

Fig ure 27 Status Screen (Universal Repeater Mode)
The following table describes the labels shown in the
Table 14 Status Screen (Universal Repeater Mode)
L ABEL
Device Information
System Name
Firmware Version
LAN Information
- MAC Address
- IP Address
- IP Subnet Mask
- DHCP Server
WLAN AP Information
- MAC Address
- Status
- Name (SSID)
- Channel
- Operating Channel
- Security Mode
- 802.11 Mode
Chapter 4 Modes
Sta tus
DESC RIPT IO N
This is the Syste m Na m e you enter in the
It is for identification purposes.
This is the current firmware version of the NBG-418N v2.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP server.
This shows the wireless adapter MAC Address of your device.
This shows the current status of the Wireless LAN -
This shows a descriptive SSID name used to identify the NBG-418N v2 in the wireless
LAN.
This shows the channel number which you select manually or the NBG-418N v2
automatically scans and selects.
This shows the channel number which the NBG-418N v2 is currently using over the
wireless LAN.
This shows the level of wireless security the NBG-418N v2 is using.
This shows the IEEE 802.11 standard that the NBG-418N v2 supports. Wireless clients
must support the same standard in order to be able to connect to the NBG-418N
v2
NBG-418N v2 User's Guide
40
screen.
Ma inte na nc e > Syste m
O n , O ff , or O ff b y sc he dule r
> G e ne ra l screen.
.