ZyXEL Communications NBG-418N v2 User Manual page 35

Table 11 Menus: Router Mode (continued)
L INK T AB
WAN Internet
Connection
Advanced
IPv6
LAN IP
DHCP General
Server
Advanced
Client List
NAT General
Application
Port Triggering
DDNS General
Static Route IP Static Route
Security
Firewall General
Services
Content Filter
Filter
Management
Remote WWW
MGMT
UPnP General
Bandwidth General
MGMT
Advanced
Maintenance
System General
Time Setting
Logs View Log
Tools Firmware
Configuration
Restart
Sys OP General
Mode
Language Language
Chapter 4 Modes
FUNC T IO N
This screen allows you to configure ISP parameters, WAN IP address
assignment, DNS servers and the WAN MAC address.
Use this screen to configure multicast WAN and auto IP setup.
Use this screen to set the IPv6 WAN connection type, and LAN/WAN IPv6
address settings.
Use this screen to configure LAN IPv4 address and subnet mask.
Use this screen to enable the NBG-418N v2's DHCP server.
Use this screen to assign IP addresses to specific individual computers based
on their MAC addresses and to have DNS servers assigned by the DHCP server.
Use this screen to view current DHCP client information and to always assign
an IP address to a MAC address (and host name).
Use this screen to enable NAT.
Use this screen to configure servers behind the NBG-418N v2.
Use this screen to configure port triggering settings on the NBG-418N v2.
Use this screen to configure Dynamic DNS, a service that allows you to map a
fixed domain name to a non-fixed IP address.
Use this screen to configure IP static routes.
Use this screen to activate/deactivate the firewall.
Use this screen to enable or disable ICMP and VPN passthrough features.
Use this screen to configure content filter settings on the NBG-418N v2.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the NBG-418N v2.
Use this screen to enable UPnP on the NBG-418N v2.
Use this screen to enable bandwidth management on the NBG-418N v2.
Use this screen to set the upstream bandwidth and edit a bandwidth
management rule.
Use this screen to view and change administrative settings such as system and
domain names, password and inactivity timer.
Use this screen to change your NBG-418N v2's time and date.
Use this screen to view the logs for the categories that you selected.
Use this screen to upload firmware to your NBG-418N v2.
Use this screen to backup and restore the configuration or reset the factory
defaults to your NBG-418N v2.
This screen allows you to reboot the NBG-418N v2 without turning the power
off.
This screen allows you to select the device operating mode.
This screen allows you to select the language you prefer.
NBG-418N v2 User's Guide
35