Activating Ec500 For Simultaneous Ringing On Multiple Phones; Extending A Call To Your Cell Phone (Ec500) - Avaya 9600 Series Instruction Manual

Customization
While using your phone, you can now see whether an incoming or an outgoing call is encrypted.
The secure status is indicated by the secure icon, a padlock, on the active call appearance.
Note:
The secure icon appears only if a two-party call is encrypted. For 9608/9608G phones, even if you
have set the screen width of your phone to half, the phone shows the secure icon.

Activating EC500 for simultaneous ringing on multiple phones

About this task
With the EC500 feature, you can program calls in the way that your desk phone and your cell
phone ring simultaneously when there is an incoming call. Using this feature, you can answer
office calls while you are away from your desk. The system administrator has to add your cell
phone number and program the desk phone.
Procedure
1. From the Phone screen, go to the Features screen.
2. Scroll to EC500, and press Select.

Extending a call to your cell phone (EC500)

About this task
You can use the Extend Call feature to receive a call that is active on your office phone on your
mobile phone. The Extend Call feature uses EC500 Extension to Cellular. You to transfer an office
call to your mobile phone and move away from your desk. This feature is programmed by your
system administrator.
Note:
Your administrator can set the destination mobile number.
Procedure
1. During an active call, gain access to the Features screen.
2. Scroll to Extend Call , and press OK to forward the call to your mobile phone.
3. Answer the call on your cell phone.
The call remains active on your phone, so you can switch back to your phone at any time.
October 2019 Using Avaya 9601 IP Deskphone SIP
Comments on this document? infodev@avaya.com
70