Activating Ec500 For Simultaneous Ringing On Multiple Phones - Avaya J179 User Manual

Advance features
to a number which is set by your system administrator. If the SAC feature is administered on your
phone, a Send All softkey appears on the Phone screen for idle calls.
Pressing Send All turns Send All Calls on. If it is already on, pressing Send All turns it off.
You can also turn Send All Calls on or off by using the phone Features list.
Note:
Do not enable the SAC feature in case you selected the cover all option for the coverage path.
Enabling both features at the same time can cause duplicate entries in the call log.
Procedure
1. Navigate to the Features screen.
2. Scroll to choose Send All Calls.
3. Press Select or OK or the corresponding line button to activate the feature.
Related links
About forwarding calls
Activating EC500 for simultaneous ringing on multiple
phones
About this task
Using the EC500 feature, you can program your phone in such a way that the phone and your cell
phone rings simultaneously when there is an incoming call. With this feature, you can answer
office calls while you are away from your desk. The system administrator has to add your cell
phone number and program the desk phone.
Procedure
1. From the Phone screen, gain access to the Features screen.
2. Scroll to EC500 and press one of the following:
• Select
• OK
• Corresponding line button
May 2018
on page 33
Using Avaya J169/J179 IP Phone H.323
Comments on this document? infodev@avaya.com
34