Upgrading An Mx240, Mx480, Or Mx960 Router To Use The Scbe3-Mx - Juniper MX960 Hardware Manual

Routing Engine Status:
Slot 1:
Current State
...
4. Verify the SCBE2-MXs before you finish by issuing the show chassis hardware command:
user@host> show chassis hardware
Hardware inventory:
Item
CB 0
CB 1
...
As shown in the example, the MX960 now has SCBE2-MXs.
RELATED DOCUMENTATION
SCBE2-MX Description | 157
Removing an MX960 SCB | 562
Installing an MX960 Switch Control Board | 387

Upgrading an MX240, MX480, or MX960 Router to Use the SCBE3-MX

NOTE: Due to certain limitations in functionality, the MPC7E is not supported in slot 1 when
the SCBE3-MX is plugged into an MX960 PREMIUM3/BASE3 system. If you have an MPC7E
in slot 1, move it to a different slot before installing the SCBE3-MX.
Upgrade the Routing Engine | 584
1.
Install the Routing Engine into the SCBE3-MX | 584
2.
Install the SCBE3-MX into the Router Chassis | 585
3.
Complete the SCBE3-MX Upgrade | 585
4.
Backup
Version Part number
REV 08 750-048307
REV 08 750-048307
Serial number Description
CABC9829 Enhanced MX SCB 2
CABC9828 Enhanced MX SCB 2
583