Message Edit Screen And Description Of Operations - Yaesu FT3Dr Instruction Manual

Message edit screen and description of operations

followed by [MSG EDIT] in the APRS MESSAGE LIST detail screen to display
Touch
the message edit screen.
You can edit and transmit a received or transmitted message in the message edit screen.
①
To: JA1ZRL
....................
②
....................
....................
.......
③ ④
• Select a standard message...Touch [EDIT TXT] followed by [STANDARD MSG].
• Enter the call sign of your partner station...Touch
• Deleting all messages...Touch
• Move to the frequency display screen...Press the [BACK] key twice.
• Set mode (page 42)...Press the [DISP] key for a second or longer.
Tip
The contents in the edit screen are saved in the editing buffer until the power supply is switched off or
when ALL CLEAR is executed.
①Call sign: The call sign of the destination will be displayed.
②Message: A maximum of up to 67 characters can be entered in
③[M-TX]:
④[EDIT TXT]:
⑤
:
⑤
followed by [CLR ALL].
33
a transmission message.
Touch this to manually send the message.
Touch this to display the screen for entering the
message text.
Touch this to display the function expansion key
screen. Touch this to delete all messages or to edit
the call sign of the partner station to send to.
followed by [EDIT CS].