Aprs Set Mode Function List - Yaesu FT3Dr Instruction Manual

APRS Set mode function list

y 1 APRS AF DUAL
Receive audio for AF Dual Function
Setting Item: ON / OFF
Default: OFF
Explanation: ON/OFF setting to enable the AF Dual function while APRS function is
active.
y 2 APRS DESTINATION
Model Code Display
Setting Item: [APY03D]
Default: [APY03D]
Explanation: Displays the model code. This setting cannot be changed.
y 3 APRS FILTER
Filter function setting
Setting Item: Mic-E / POSITION / WEATHER / OBJECT / ITEM / STATUS / OTHER /
ALTNET
Default: Mic-E: ON
POSITION: ON
WEATHER: ON
OBJECT: ON
ITEM: ON
STATUS: ON
OTHER: OFF
ALTNET: OFF
Explanation: For setting FILTER for obtaining various beacon types.
ON: Obtains beacons
OFF: Does not obtain beacons
Mic-E: Displays the obtained MIC-Encoder beacons
POSITION: Displays the obtained Position of beacons
WEATHER: Displays the obtained Weather beacons
OBJECT: Displays the obtained Object of beacons
ITEM: Displays the obtained item of beacons
STATUS: Displays the obtained Status of beacons
OTHER: Displays the obtained packets other than those used in APRS.
ALTNET: Displays the obtained packets specified by Destination Address in Alternate
Nets.
45