Yaesu FT3Dr Instruction Manual page 5

y Setting the position information
Enter the position information of your own station manually.
1
Press and hold the [DISP] key → Touch [APRS] → [24 MY POSITION].
2
Turn the DIAL to select [Manual] and press the [DISP]
key.
A screen to enter the position information of your own
station will be displayed.
Reference
Factory shipping value: GPS
3
Press the [DISP] key.
The cursor will move to the item for setting the latitude.
4
Turn the DIAL to select "N (North Latitude)" or "S (South
Latitude)" press the [DISP] key.
The cursor will move to the item for setting the "degree".
5
Turn the DIAL to select [Degree] and press the [DISP]
key.
The cursor will move to the item for setting the "Minute".
6
Turn the DIAL to select [Minute] and press the [DISP]
key.
The cursor will move to the item for setting the "1/100th Minute".
7
Turn the DIAL to select [1/100th Minute] and press the [DISP] key.
The seconds will be displayed within parentheses.
8
Turn the DIAL to select "LON" and press the [DISP] key.
The cursor will move to the item for setting the longitude.
9
Turn the DIAL to select "E (East Longitude)" or "W (West Longitude)" and press the
[DISP] key.
The cursor will move to the item for setting the "Degree".
10
Enter the "degree", "minute" and "1/100th minute" in the same way as Step 5-7.
11
Press the [DISP] key.
The position information will be set.
12
Press the PTT.
To exit the set mode and return to the operating screen.
4
24 MY POSITION
GPS Manual P1
P2 P3
P5 P6
P8 P9
24 MY POSITION
Manual :
LAT N 0° 00.00'
(' 00" )
LON E 0° 00.00'
(' 00" )
P4
P7
P10