Yaesu FT3Dr Instruction Manual page 52

WEATHER: Setting for the sound of the bell that rings when a weather beacon is
received.
OBJECT: Setting for the sound of the bell that rings when a object beacon is received.
ITEM: Setting for the sound of the bell that rings when an item beacon is received.
STATUS: Setting for the sound of the bell that rings when a status beacon is received.
OTHER: Setting for the sound of the bell that rings when a beacon other than what
is used by APRS is received.
MY PACKET: Setting for the sound of the bell that rings when a when a self transmitted
beacon (relay wave) is received.
MSG: Setting for the sound of the bell that rings when a new message is received.
GRP: Setting for the sound of the bell that rings when a group message is
received.
BLN: Setting for the sound of the bell that rings when a bulletin message is
received.
MY MSG: Setting for the sound of the bell that rings when a self transmitted message
(relay wave) is received.
DUP BCN: Setting for the sound of the bell that rings when a overlapping beacon is
received.
DUP MSG: Setting for the sound of the bell that rings when a message that has already
has been received is received again.
ACK REJ: Setting for the sound of the bell that rings when response data (ACK, REJ)
of a message sent by your station is received.
OTHER MSG: Setting for the sound of the bell that rings when a message addressed to
another destination is received.
TX BCN: Setting for the sound of the bell that rings when a beacon is being sent
from your station.
TX MSG: Setting for the sound of the bell that rings when a message is being sent
from your station.
y 11 APRS UNIT
Unit setting for APRS display.
Setting item: Position: MM.MM' / MM'SS"
Distance: km / mile
Speed:
Altitude: m / ft
Temp:
Rain:
Wind:
Default: Depends on the transceiver version.
Explanation:
Set the measurement unit for Latitude/Longitude (Position), Distance, Speed, Altitude,
Temperature (Temp), Precipitation (Rain), and Wind Speed (Wind).
Position: Unit display of minute of Longitude/Latitude (DD° MM.MM') can be changed.
MM' is displayed in 1/100 minute and SS" in seconds.
Distance: Unit can be set to [km] or [mile].
km/h / knot / mph
°C / °F
mm / inch
m/s / mph
51