Receiving Messages - Yaesu FT3Dr Instruction Manual

Receiving messages

When a message is received, a pop-up screen appears, together with a "pee po pee po..."
audio alarm and a flashing strobe (white LED), followed by the screen below.
Touch [F MW] in the frequency display screen followed by [M.LIST] to display the APRS
MESSAGE LIST screen.
Reference Touch
1
Turn the DIAL to select a received message.
Turn the DIAL to scroll the screen up and down and select a received message.
2
Press the [DISP] key.
The APRS MESSAGE LIST detail screen will appear for you to check the message.
Reference Touch
3
Press the [BACK] key.
Return to the APRS MESSAGE LIST screen.
Tips
• A "pee po pee po pee po..." alarm will sound when a group/bulletin message
is received and the call sign will be displayed as shown in the right screen.
• A "pee..." alarm will sound when a message ACK is received and the "AM>(call sign)" will be displayed
on the screen.
• A "pee...." alarm will sound when a message REJ (reject) is received and the "RM>(call sign)" will be
displayed on the screen.
• The operation of the flashing (white LED) display can be changed by selecting [APRS] → [5 APRS
MSG FLASH] in the set mode.
• The ACK/REJ display can be changed by the [APRS] → [9 APRS POPUP] setting in the set mode.
RX JA1ZRL
MSG 01 *
....................
....................
....................
.......
followed by [S.LIST] to move to the APRS STATION LIST screen.
followed by [MSG EDIT] to display the message edit screen.
34