Message Edit Screen And Description Of Operations - Yaesu FTM-300DR Instruction Manual

Select the message to display
Delete the message text and automatically enter the command
"?APRSP".
Cancelling a message resend.
Setup menu (page 37)

Message edit screen and description of operations

Use the [MSG EDIT] function key on the APRS MESSAGE detail screen to display the
message edit screen.
You can edit and transmit a received or transmitted message in the message edit screen.
Callsign:
Message:
Standard Message: Rotate the B Band DIAL knob to select the standard message and press B Band
•Operation
Display the screen for entering the message text.
Insert a space at the cursor position.
Delete the character to the left of the cursor.
Deleting all texts
Manually send the message.
Enter the callsign of the destination will
Tip
The contents in the edit screen are saved in the editing buffer until the power supply is switched off or
when ALL CLEAR is executed.
To: JA1YPC- 7
②
Hello! every member
||||||||||||||||||||
||||||||||||||||||||
|||||||
③
1 Hello!
The callsign of the destination will be displayed.
A maximum of up to 67 characters can be entered in a transmission message.
DIAL knob to paste the standard message at the cursor position.
Press the DIAL knob to display
then rotate the DIAL knob.
[F(SETUP)]→[QUERY]
[F(SETUP)]→[TXCLR]
Press and hold the [F(SETUP)] key.
①
|
|||||||||
[F(SETUP)]→[EDIT TEXT]
[F(SETUP)]→[INS]
[F(SETUP)]→[
[F(SETUP)]→[CLR ALL]
[F(SETUP)]→[M-TX]
[F(SETUP)]→[EDIT CS]
30
,
]